|
Ion Deposition Printer | |||||
Major features of M-32
High Speed 32 Pages per minute
High Duty 200,000 pages per month High Reliability Preventive Maintenance Cycle 500,000 pages High Performance Controller INTEL i960 RISC Processor | |||||
Ion Deposition explained | Paper Handling | ||||
M-32 How fast do you want ?
Rated at 32 A4 pages per minute, the M-32 is the printer of choice for demanding high volume environments. Available options include a duplex unit which prints and completes forms in one run. Its extremely short first page time of only 8 seconds, large paper trays and the optional 2000 sheet large capacity feeder combine to reduce manual intervention and waiting times to a minimum. The M-32 can take large amounts of correspondence, envelopes and forms in its stride. |
|||||
| |||||
Ion Deposition
The Ion Deposition technology enables printing on much thicker paper, such as card, labels etc up to 200g/m2. The printing process consists of long life main unit, image receptor and drum.
The drum benefits from a complex coating to give a particular hardness to help it withstand wear and tear. Ion deposition is a gentle process compared to most other printing technologies. With a very flat paper path that accepts extremely thick paper and at the same time reduces the risk of paper jams and the subsequent wear and tear on the internal components.
All of these factors combine to give a monthly duty cycle of 200,000 pages, a maintenance interval of 500,000 pages and a rated life of 12 million impressions. Which in turn gives an incredibly low cost per page.
1.Create Latent image on dielectric drum.
2.Developing with single component toner.
3.Transfer
4.Clean residual toner & erase change on drum.
5.Fix toner image by fuser unit. 1. Durable and robust drum and process protect against the sharper edge of Tag and label stock. 2 Direct writing on Image receptor drum creates clear printing of Bar codes. Optional PCMCIA emulation card has Magnum Code V and IGP. 3. Line Printer replacement with optional PCMCIA emulation of Printronix P-series Line printers.
| |||||
| |||||
|
Duplex 27 ipm (A4) All paper capacity is when using 75g/m2 paper. Specifications subject to change
without notice. All trademarks mentioned above are the property of their respective makers.
M-32 & Options
Print speed
Simplex 32ppm (A4)
Emulation
HP Laser Jet PCL5/HPGL2
PostScript (Microsoft Truelmage) with Automatic switching
(optional)
Printronix P-series Line printer /
Printronix IGP, & Magnam Code-V
Engine Type
Ion deposition printing technology
Font
14bit-mapped fonts and
13 scaleable fonts
(optional)
35 Microsoft type outline fonts
Resolution
300 x 300 dpi
Interface
Centronics parallel, Serial RS232C/422
Warm up time
within 60 sec
Optional Interface
Multiplatform Network Board
First Print
Simplex less than 8 sec
Duplex less than 13 secPower Source
230V 50Hz
Paper
Bond, color, label, card
Power Consumption
1.65KVA (full configuration)
Paper Size
A4, A5, Letter, Legal
Noise Level
53 dbA printing
43 dbA idle
Paper Weight
60-90g/m2
60-200g/m2 with PFU3Weight
approx. 40 Kg
Paper Feed
2 trays, 250 sheets each
Dimensions
610(W) x 380(D) x 395(H) mm
Paper Output
500 sheets face down
25 sheets face upMonthly Duty Cycle
200,000 pages per month
Controller
Intel i960CF 33MHz
Service Life
rated up to 12 million pages
Model No.
M-32
Printer, 32ppm simplex A4, 230VAC 50Hz
& power cable, heat-roller fixing, 300x300dpi, left tray, 2x250 sheets A4 trays,
500 sheets face down stacker function (normal paper), Intel i960CF 33MHz controller