Function |
DISPLAY |
Function Description |
1 |
Multipart |
Selects printing pressure. Improves the printing capability on multipart paper. Dark 2= up to Original + 8 copies
|
2 |
Head Adjustment |
Adjusts the gap between the print head and platen
|
3 |
TOF Adjustment |
Specifies the top of form (TOF) position
|
4 |
Page Length |
Specifies the page length of the form to be used
|
5 |
Paper Width |
Specifies the width of fanfold paper
|
6 |
Top Margin |
Specifies the length of the area at the top of the paper where printing is disabled in units of 1/6 LPI from the TOF position
|
7 |
Bottom Margin |
Specifies the length of the area at the bottom of the paper where printing is disabled in units of 1/6 LPI from TOF position of the following page.
|
8 |
Left Margin |
Specifies the length of the area on the left side of the paper where printing is disabled from the left end of the printable area
|
9 |
Right Margin |
Specifies the length of the area on the right side of the paper where printing is disabled from the right end of the printable area.
|
10 |
Quality |
Specifies character quality
|
11 |
Font Select |
Specifies the font of quality charaters
|
12 |
Character pitch |
Specifies the character pitch
|
13 |
LF pitch |
Specifies the line feed pitch
|
14 |
Zoom In/Out |
Specifies the magnification of enlargement (Zoom in) or reduction (Zoom Out)
|
15 |
Select Save Memory |
Saves the parameters specified using functions 1~14 in one of 6 Memory groups.
|
16 |
Select Load Memory |
Reads data from the specifiied format memory into the format memory currently in use
|
Function |
DISPLAY |
Function Description |
20 |
Emulation |
The prnter has three types of emulations, Epson LQ-2550, IBM 2391, HP Rugged Writer 480 (PCL3)
|
21 |
CHR TB HP |
Specifies the charcter table used in the HP mode
|
22 |
CHR TB EPSON |
Specifies the charcter table used in the EPSON mode
|
23 |
CHR TB IBM |
Specifies the charcter table used in the IBM mode
|
24 |
National Font (Epson) |
The printer has sixteen National Fonts - USA, France, Germany, UK, Denmark, Sweden, Italy, Spain, Japan, Norway, Denmark 2, Spain 2, Latin America, Korea, Turkey and Legal
|
25 |
Code Page |
The printer has seven code pages - CP437: USA, CP850: Multilingual, CP857: Turkey, CP860: Portugal, CP863: Canadian-French, CP865: Norway, CP864: Arabic, ISO-1: Western Europe, ISO-8859-1
|
26 |
AGM IBM |
Enables the alternative graphic mode (AGM) commands to be used
|
27 |
CR SETTING |
Specifies whether or not to feed a line when the printer receives a carriage return
|
28 |
LF SETTING |
Specifies whether or not to excute a carriage return when the printer receives a line feed (LF) command
|
29 |
ACCENT CHR |
Specifies the method of printing accent characters
|
30 |
ZERO STYLE |
This function allows the user to select Slashed or Not slashed
|
31 |
TABULATION |
The actual position of the horizontal tab depends on the processing of the selected emulation
|
32 |
PAGE LOCK |
Specifies whether or not to change the page length specified in the SETUP MODE by a software command
|
33 |
FONT LOCK |
Specifies whether or not to change the font selected in the SETUP MODE by a software command
|
34 |
PITCH LOCK |
Specifies whether or not to change the character pitch selected in the SETUP MODE by a software command
|
35 |
QLTY LOCK |
Specifies whether or not to change the character quality selected in the SETUP MODE by a software command.
|
36 |
CHR TBL LOCK |
Specifies whether or not to change the Character Table selected in the SETUP MODE by a software command
|
40 |
BC / L.CHR |
Specifies whether or not to activate the bar code and enlarged character function.
|
41 |
BC TYPE |
Specifies one of thirteen available types of bar code
|
42 |
BC SIZE |
Specifies the default bar code size
|
43 |
LARGE CH.SIZE |
Specifies the default size of enlarged characters
|
44 |
SETUP COMMAND |
Specifies whether or not to accept the software set up command
|
50 |
PCL MODE |
Specifies the emulation level in the HP mode
|
51 |
CHR TB2 HP |
Specifies the symbol set of the secondary charcter set in the HP mode
|
60 |
OPTION |
Specifies whether or not to install option
|
61 |
PAPER PATH |
Selects the paper path from among eight available selections
|
62 |
AUTO SCROLL |
specifies the automatic scrolling
|
63 |
P.OUT DTCT |
Specifies whether or not to perform paper bottom detection
|
64 |
P.SKEW DTCT |
Specifies whether or not to perform teh skew detection for checking whethre paper has been loaded manually on the skew
|
65 |
P.JAM DTCT |
Specifies whether or not to perform the paper jam detection
|
66 |
LF SPEED |
Specifies the line feed speed
|
67 |
CSF HA MODE |
Specifies the timing for executing head adjustment if the HEAD ADJUSTMENT option is set to AUTO.
|
70 |
INTERFACE |
Selects the parallel or serial interface
|
71 |
SLCT IN ENBL |
This function is used to control several printers
|
72 |
PARITY BIT |
Specifies the parity bit when the serial interface is used
|
73 |
DATA LENGTH |
Specifies the data length when the serial interface is used
|
74 |
STOP BIT |
Specifies the stop bit when the serial interface is used
|
75 |
PROTOCOL |
Specifies the protocol for the serial interface
|
76 |
BAUD RATE |
Specifies the data transmission rate for the serial interface
|
77 |
SERIAL ERROR |
Specifies whether or not to print asterisk
|
78 |
CTS ENABLE |
Specifies whether or not to validate the CTS (Clear to Send) signal
|
79 |
CD ENABLE |
Specifies whether or not to validate the CD (Carrier detect) signal
|
80 |
DSR ENABLE |
Specifies whether or not to validate the DSR (data set ready) signal
|
81 |
BUFFER SIZE |
Specifies the size of the input buffer
|
82 |
BUSY/ACK |
Specifies the timing of the BUSY and ACK signals transmitted via the parallel interface
|
83 |
DATA/LATCH TIMING |
Specifies the timing to latch DATA 1-8 at the falling edge (TYPE F) or rising edge (TYPE R.) of the strobe signal
|
90 |
PRINT DIR |
The printing directions shown below are available PRE-DIRECTION: Bi-directional printing 1 BI-DIRECTIONAL: Bi-directional printing 2 UNI-DIRECTIONAL: Unidirectional printing
|
91 |
DISPLAY LANG |
Specifies the display language on the LCD
|
92 |
KEY LOCK |
Specifies whether or not to validate the keys other than the RESET key and ONLINE key in the ONLINE condition
|
93 |
RESET LOCK |
Specifies whether or not to validate the RESET key in the ONLINE condition
|
94 |
SETUP LISTING |
Prints the list of the parameters specified in the setup mode
|